FirmDistribution@FirmDistribution@lemmy.world

A $150 Buttonless, Open Hardware Answer to Kindle is being crowdfunded by Open Book Touch

cross-posted from: lemmy.world/post/49429587

URL for the crowdfunding: www.crowdsupply.com/…/open-book-touch

Specs:

  • Display: 4.26" e-paper touchscreen, 480 × 800 px, warm + cool frontlight
  • Processor: ESP32-S3 dual-core, Wi-Fi + Bluetooth LE
  • Memory: 16 MB flash, 8 MB PSRAM
  • Formats: EPUB and plain text, no DRM
  • Storage: microSD card slot
  • Interface: USB-C with integrated LiPo charging
  • Dimension: 78 × 120 × 10 mm, about 85 g
  • Open source: MIT-licensed firmware, open hardware (to be released at shipping)

It also has a replaceable 800 mAh battery, I found it cool :)

itsfoss.com/news/open-book-touch-crowdfunding/
lemmy.worldA $150 Buttonless, Open Hardware Answer to Kindle is being crowdfunded by Open Book Touch - Lemmy.WorldURL for the crowdfunding: https://www.crowdsupply.com/oddly-specific-objects/open-book-touch [https://www.crowdsupply.com/oddly-specific-objects/open-book-touch] Specs: - Display: 4.26" e-paper touchscreen, 480 × 800 px, warm + cool frontlight - Processor: ESP32-S3 dual-core, Wi-Fi + Bluetooth LE - Memory: 16 MB flash, 8 MB PSRAM - Formats: EPUB and plain text, no DRM - Storage: microSD card slot - Interface: USB-C with integrated LiPo charging - Dimension: 78 × 120 × 10 mm, about 85 g - Open source: MIT-licensed firmware, open hardware (to be released at shipping) It also has a replaceable 800 mAh battery, I found it cool :)
kkj@kkj@lemmy.dbzer0.com

Replying to @⁨kilgore_trout@feddit.it⁩

Thanks for mentioning the comparison. It was farther down than I had previously scrolled. TL;DR frontlight, touchscreen, user-replaceable battery, but also bigger bezels, double the price, and looks to be 3D printed instead of injection-molded. Comes with open firmware instead of just allowing it, but that’s a non-factor to anyone with a little computer knowledge, which I suspect includes basically every potential buyer of this sort of device.

The XTEink X4 Pro has a front light and a touchscreen, but needs a magnetic adapter to charge (comes with one and they’re cheap to replace, but still an extra thing to lose). It’s $110 MSRP.